| Customization: | Available |
|---|---|
| Type: | Microfiltration Machine |
| Method: | Combined Treatment |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Flat Sheet Membrane MBR
Flat Sheet Membrane Element Introduction
A series of flat membrane production company specialized components used in submerged membrane bioreactor (MBR). Flat sheet membrane element is composed of membrane, diversion cloth and a honeycomb board, on top of the guide plate is provided with a suction port, activated sludge membrane in the pool are blocked in external membrane element, filtered water by membrane element suction under negative pressure is
drawn. The structure of flat membrane diagram is as follows:
The Characteristics of Flat Sheeet Membrane
1. Preprocessing requirments is low, long service life of membrane, the surface is not easy to jam, easy maintenace
2. Under the condition of high concentration of activated sludge can run nomrally, can reduce the aeration tank volume
3. Daily mangement is simple, do not need to back flush, only 1 or 2 times a year to clean
4. Membrane filtration resistance is low, can take advantage of the liquid level difference work, omit suction pump and can reduce energy comsumtion
5. Can design become more compact two-layer structure, reduce the device volume, and reduce the construction cost
The Advantages of Our Flat Membrance
Our production of flat membrane technology, with independent MBR multilayer flat membrane patent, to solve various water treatment industry provides a wide range of flat MBR template technology. Compared with other flat membrane, our flat membrane has the following advantages:
1. The filling density increased 20%;
2. Aeration saving 20%;
3. Installation efficiency increased by 100%
And the produced water quality is better than the national sewage discharge level A standard, can be used for greening irrigation, car washing, road dust removal and washing, flushing, flushing, fire fighting, landscape supplementary water and other non-drinking water places.
| Element parameters | RGE-10 | RGE-100 | RGE-150 | RGE-150A |
| Effective membrane area (M²/piece) | 0.1 | 1.0 | 1.5 | 1.5 |
| Size(L*W*D mm) | 320*220*5 | 1200*510*5 | 1800*510*5 | 1800*510*5 |
| Weight (kgs) | 0.42 | 3.3 | 4.9 | 4.9 |
| Produce water Q (L/day) | 40~70 | 400~700 | 600~900 | 700~1000 |
| aeration rate (L/min) | ≥ 6 | 14 ≥Q≥11 | 14 ≥Q≥11 | 14 ≥Q≥11 |
| Pore size (µm) | 0.1~0.4 | |||
| Support plate material | ABS(acrylonitrile -butadiene -Styrene copolymer) | |||
| MLSS (mg/L) | 15000~20000 | |||
| PH | 2 ~12 | |||
| Effluent turbidity (NTU) | <= 1.0 | |||
| Temprature(ºC) | 5~ 40 | |||
| Membrne material | PVDF (Polyvinylidene fluoride ) with PET | |||
1. Sewage treatment and reuse of reclaimed water in new rural construction.
2. Sewage and new water reuse in industrial and mining enterprises, rural areas, outposts and tourist attractions.
3. Industrial wastewater treatment similar to domestic sewage.
4. Areas subject to site constraints and water scarcity.
){kind=link}