Curtain Design Hollow Fiber PVDF Membrane Mbr for Sewage Treatment System

• Customization: Available
• Type: Sewage Water Treatment
• Method: Biological Treatment
• Model NO.: JHM-MBR15-10
• Usage: Industrial, Agriculture, Hospital, Environmental Engineering Company
• Pore Size: 0.034micron
• Material: PVDF (with Pet Linen)
• Effective Membrane Area: 15m2
• Design Flow: 10-40L/M2/H
• Membrane ID/Od: 1.0/2.2mm
• Filter Method: Negative Pressure Suction Mode
• Tpm(Max): 20-50kpa
• pH Range: 2-12
• Temperature Range: 10-45 Celsius
• Mlss Range: 4000-12000ppm
• Application: Municipal Wastewater Treatment Plant
• Usuage: Wastewater Sewage Treatment Plant
• Fuction: Domestic Wastewater Treatment Plant
• Transport Package: Export Package
• Specification: 630*1500*36mm
• Trademark: JHUI
• Origin: Shandong
• HS Code: 8421999090
• Production Capacity: 3600000 M2

Product Description

Products Description
Our independent R & D and production of curtain membrane asymmetric (asymmetric) structure, PVDF material, on the surface of the support structure, integrated composite dense separation layer, filtration accuracy of 0.03 -0.1µm. 

This kind of membrane filament has the highest filtration accuracy in the MBR membrane assembly of hollow fiber at present. The maximum pore diameter is 0.0552 micron, the minimum pore diameter is 0.0301 micron, and the average pore diameter is 0.0341 micron. The pore diameter distribution is very uniform.

The smaller filtration accuracy can ensure that the pollutants cannot enter the membrane hole, which will lead to blockage. Therefore, it has great advantages in anti-pollution ability and membrane flux, as well as lasting hydrophilicity.

The average pore size of this kind of curtain membrane independently developed and produced by our company is 0.0341 micron, or 34.1nm, which fully meets the requirements of "submerged hollow fiber ultrafiltration membrane components and devices for drinking water treatment"

According to the national standard GB/T 25279-2010 test, the water yield of our company's membrane silk is 0.1361m3/(m2 h), that is, 136.1 L/ m2. However, according to China's urban construction industry standard CJ/T 530-2018, the pure water flux of supporting membrane is no less than 40L/ m2 /h;Therefore, this membrane filament is the most water-yielding membrane in the current organic MBR membrane, and the membrane flux is about twice as much as that of other MBR membrane.
 

Membrane material	Poly vinylidene fluoride(PVDF with Reinforced lining)
Membrane Pore size	0.03 ~0.04µm
Mebrane fiber (ID/OD)	1.0/2.2mm
Filter method	Negative pressure suction mode
TPM(Max)	50Kpa
Designed Flux	10-40L/M2 per hour
PH Range	2-11
Temprature Range	5-40ºC
MLSS Range	5000-12000mg/L                                  (min:3000mg/L,  max:15000mg/L)

Products Photos


Products  Model

Model		JHM-MBR-I6	JHM-MBR-I10	JHM-MBR-I15	JHM-MBR-I20
Element size	A*b	630*600mm	630*1000mm	630*1500mm	630*2000mm
	Connection	Ф25	Ф25	Ф32	Ф32
Element parameters	Efective membrane area	6m²	10m²	15m²	20m²
	Pore size	0.03~0.1µm
	material	PVDF membrane  with PET support tube & ABS cartridge
	Method of integration	Both ends of the catchment
	Filtration mode	Negative pressure suction by submersed membrane
Operating conditions	TMP	0.02~0.05Mpa
	MAX Backwash pressure	0.1Mpa
	Temperature	10~45ºC
	Run PH tolerance range	5~9
	PHrange	2~10
	Aeration rate (Gas water ratio)	15:1~20:1
Performance	Produced water turbidity	Turbidity <0.3NTU  SS≈0  SDI<4
	Working life	≥ 5 years under normal usuage

Products application
*Food industry: process water/ production water preparation/ sewage treatment.
*Beverage industry: process water/ production water/ concentrated separation treatment.
*Pharmaceutical industry: process water/ preparation water/ washing water/ injection water/ aseptic water preparation.
*Chemical industry: production water/ wastewater treatment/ water reuse.
*Power industry: boiler recharge water/ circulating cooling water.
*Electronics industry: semiconductor industry ultrapure water/ integrated circuit cleaning water/ formula water.
*Petrochemicals: oil field injection water/ petrochemical wastewater deep treatment/ chemical wastewater treatment and reuse.
*Desalination of sea water and brackish water: island areas/ coastal areas/ ships/ seawater oil fields/ etc. production/ domestic water.
*Drinking water engineering: pure water preparation/ drinking water purification/ water standard-raising.

Company introduction
Shandong jinhumo technology Co., LTD. Is a high-tech enterprise specialized in the research and development, production, application, membrane technology and engineering design of domestic hollow fiber membrane separation technology.The company has a professional team with many years of research and development experience in membrane technology and water treatment engineering application practice The company has passed iso9001:2000 quality management system certification.Country stock code :831623.

The company mainly produces research and development all kind of water treatment projects,  mainly products include:1. Hollow fibert uf membrane :PES,PAN,PVDF; 2.Holow fiber membrane MBR 3. flat sheet membrane MBR  4.MBBR( moving bed bio filter media);5. Ro membrane  6.PP water filter cartrige etc.

The above products have through large quantities of water, pollution resistance, high temperature resistant, acid and alkali resistance and other characteristics.Products are exported to the country and overseas, the ultrafiltration membrane production technology and product quality has reached the world advanced level.



Company Exhibition