Bio Pe06 Mbbr Filter Media For Wide Waste Water Treatment
1. MBBR technology introduction
1.1.Fluidized bed packing, also known as MBBR packing, is a new type of bioactive carrier. It adopts scientific formula, according to different water quality requirements, integrates different kinds of Microelements in polymer materials, which are conducive to the rapid growth of microorganisms. After special process modification and construction, it has the advantages of large specific surface area, good hydrophilicity, good fluidity, high biological activity, easy to hang membrane, good treatment effect, long service life and so on. Principle of action of fluidized bed packing when sewage passes through the fluidized bed packing reactor, microorganisms in the water continuously adhere to and grow on the inner and outer surfaces of the fluidized bed packing to form a biofilm. The fluid bed packing rotates freely under the agitation of the mixed liquid in the reactor. The biofilm fully contacts and decomposes the pollutants in the water body, so that the water quality can be purified. The turnover of mixed liquid and the movement of carrier are realized by aerobic aeration or anaerobic agitation.
1.2.MBBR features:
1. Enhanced nitrogen and phosphorus removal
The sludge age separation of different functional microorganisms in the same reactor can be realized by using the composite process of activated sludge and suspended packing. Denitrifying bacteria (nitrifying bacteria) are generally long sludge age bacteria, which need a longer sludge age (15-25d); phosphorus removing bacteria (phosphorus accumulating bacteria) are generally short sludge age bacteria, which need a shorter sludge age (3-7d); the sludge age is too long, which is easy to cause poor microbial activity, reduce the treatment load, aging is difficult to gather and reduce the sedimentation performance, etc. in fact, there is an irreconcilable contradiction in the sludge age in the traditional denitrifying and phosphorus removal process .
The composite process provides a carrier for the growth of nitrifying bacteria, prolongs the sludge age and improves the denitrification effect due to the addition of biological fillers; at the same time, controlling the activated sludge system to a short sludge age can enhance the phosphorus removal effect; the sludge membrane fully fluidizes under the driving of aeration and water flow, promotes the renewal of biological membrane, prevents the sludge age from being too long and the sludge aging treatment performance from declining; the water temperature in winter is low and the activated sludge age is low When the sludge system is not conducive to the growth of nitrifying bacteria, the abscission biofilm can continuously inoculate the activated sludge and maintain the nitrification performance of the system.
2. Strong impact load resistance and good treatment effect
The impact load mainly includes the impact of conventional pollutant water quality, toxic pollutant water quality and water quantity. In essence, it is the impact of the change of pollutant quantity carried by microorganism per unit surface area on the treatment effect in unit time. The sludge age in the packing area of MBBR Process is long and the abundance of microbial population is increased, which is beneficial to the treatment of refractory organics.
Under the conditions of low temperature, high salt and low substrate, MBBR has a long mud age and a partial aerobic and anoxic microenvironment, which is conducive to the selection and enrichment of microorganisms and the enrichment of domesticated psychrophilic bacteria and high salt tolerant bacteria.
The mass transfer of biofilm is slower than that of activated sludge, and the heat generated by biodegradation is also slowly exchanged with water body. Improving the local environmental temperature of microorganisms is conducive to the maintenance of bacterial activity, which shows that MBBR still has a better treatment effect under the conditions of low temperature, high salt and low substrate.
3. The activated sludge is not easy to expand
The pure MBBR system is adopted, because it is a pure membrane method, there is no sludge bulking problem; when the composite process of activated sludge and suspended filler is adopted, due to the high proportion of inorganic matter in the aged falling biofilm, the density is large and easy to settle; and the extracellular polymer of biofilm is more than that of activated sludge, which has the contact flocculation effect, improves the sludge aggregation performance and improves the sludge settling performance.
The sludge yield of the biofilm process is only half of that of the activated sludge process. MBBR Process can significantly reduce the sludge yield, improve the sludge settling performance, easily reduce the water content of sludge, and save the cost of sludge disposal.
4. It is not easy to block and need no back washing
In the fixed bed process, there are many problems, such as uneven water distribution, easy to produce and die area, additional energy consumption and supporting facilities required for regular backwashing, and reduction of nitrification performance caused by red insects. Because the packing and water flow can be mixed in the whole volume of the biological pool, the possibility of blockage of the biological pool is fundamentally eliminated, and the pool capacity is fully utilized without back washing.
5. Long service life of MBBR suspension packing system
The packing is wear-resistant and durable. The agitator adopts banana type agitating blade, with soft outline and without damaging the packing. The whole agitating and aeration system is easy to maintain and manage. As the cutting effect of packing on air bubble improves the oxygen transfer efficiency, perforated aeration can be used to improve the safety of aeration system and prolong the maintenance period.
6. Applicable to upgrading and three-dimensional capacity expansion of sewage treatment plant
MBBR Process has high flexibility in operation, and can adopt various tank types without affecting the treatment effect of the process; at the same time, it can be very flexible to select different specific surface area fillers and different filler filling rates. When the water quality or quantity of influent water changes in actual operation, only by increasing the filling rate of filler, it can ensure that the original designed biological tank capacity remains unchanged, achieve the purpose of physical capacity expansion, and achieve the requirements of both efficient treatment and long-term expansion of treatment scale without increasing the tank capacity.
1.3.Jinhuimo MBBR Bio filter operation parameters:
|
85%
|
|
15-65%
|
|
3-15days
|
|
400-1200
|
|
2000-10000
|
|
2000-15000
|
|
5-60ºC
|
|
>16years
|
|
100% virgin HDPE
|
1.4. Advantages:
|
JInhuimo MBBR |
Others |
Quality Control |
1. The shape is perfect, cannot deform easily;
2. Can be anti-UV;
3. Less dust suitable for aquaculture; |
1. Easy to deform;
2. No UV protection ;
3. More dust;
4. Non-food grade;
|
Production Control |
20 high-speed production lines,production speed is 1.5 times that of others |
Average production speed |
Material |
100% Virgin HDPE |
Plastic filter |
1.5. MBBR moving bed bio filter parameter table:
Style no |
Spec.(mm) |
Design |
Density
(g/cm3) |
Material |
QTY
(PCS/M3) |
Surface area
(m2/m3) |
Void ratio |
Dosing ratio |
Membrane-forming time(days) |
Nitrificatin efficiency
(GNH4-N/m3.d) |
BOD5 Oxidation efficiency (kgBOD5/m3.d) |
COD Oxidation efficiency (kgCOD/m3.d) |
Weight
(kg/M3) |
PE01 |
Φ12*9 |
4 holes |
0.96-0.98 |
Virginal HDPE |
>636,000 |
>800 |
>88% |
20-65% |
5 -15 |
1000 |
5-9kg |
6-10kg |
120 |
PE02 |
Φ11*7 |
4holes |
0.96-0.98 |
Virginal HDPE |
>839,000 |
>900 |
>86.5% |
15-60% |
5 -15 |
1100 |
6-10kg |
7-11kg |
135 |
PE03 |
Φ10*7 |
5holes |
0.96-0.98 |
Virginal HDPE |
>889,000 |
>1000 |
>85.2% |
15-60% |
5 -15 |
1200 |
7-11kg |
8-12kg |
145 |
PE04 |
Φ16*10 |
6holes |
0.96-0.98 |
Virginal HDPE |
>264,000 |
>800 |
>88% |
20-65% |
5-15 |
1000 |
5-9kg |
6-10kg |
120 |
PE05 |
Φ25*10 |
19holes |
0.96-0.98 |
Virginal HDPE |
>148,000 |
>500 |
>90.5% |
25-75% |
5-15 |
600 |
3-7kg |
4-8kg |
90 |
PE09 |
Φ15*15 |
8holes |
0.96-0.98 |
Virginal HDPE |
>2,300,000 |
>1000 |
>85.2% |
15-60% |
5 -15 |
500-1400 |
7-11kg |
8-12kg |
145 |
PE10 |
Φ25*4 |
64holes |
0.96 |
Virginal HDPE |
>210,000 |
>1200 |
>86.5% |
10-50% |
5-15 |
1500 |
8-12kg |
9-13kg |
135 |
PE38 |
Φ25*10 |
38holes |
0.95 |
Virginal HDPE |
>116,000 |
>800 |
>90% |
20-30% |
5-15 |
1000 |
8-12kg |
9-13kg |
107 |
1.6. MBBR moving bed bio filter different models show:
2. Company introduction:
Shandong Jinhuimo Technology Co., Ltd. is a high-tech enterprise specializing in the research and development/production/application
/membrane technology and engineering design of MBBR moving bed Biofilm Reactor technology in China. we have a professional team of
nearly 20 years engaged in research and development of membrane technology and water treatment engineering application experience,
advanced ultrafiltration membrane module production capacity and large enterprise base. It has passed ISO 9001:2000 quality management
system and SGS certification.Country stock code :831623.
3. MBBR moving bed biofilm reactor application:·
·Pulp and Paper industry;
·Food and Drink;
·Coke and Steel Mill;
·Sewage Treatment Plant;
·Dairy Industry;
·Beverage Factory;
·Automobile Industry;
·Chemical Industry;
·Food Wastewater;
·Chemical Waster ;
·Aquaculture and Koi Ponds;
·Integrated Container A²O;
·Process with Small Footprint;
·Printing and Dyeing Wasterwater;
·Wastewater Treatment System;
·Municipal Wastewater Treatment.
4. Qingdao Jinhuimo company attend to international exhibitions listed in these 2 years:
In 2018, we attended to Russian, Malasia, Vietnam Water exhibition;
In 2019, we attended to Thailand, Pakistan, Indonesia, India water exhibition;
All we did is finding each other, if you need our MBBR moving bed biofilm reactor, warlmly welcome to contact with us!